The solution having highest vapour pressure is (Assume 100% ionisation of electrolytes)
1. 1 N KNO3
2. 1 N Ba(NO3)2
3. 1 N Al2(SO4)3
4. 1 N Th(NO3)4
सबसे अधिक वाष्प दाब वाला विलयन (विद्युतअपघट्य का 100% आयनन मान लीजिए)
(1) 1 N KNO3
(2) 1 N Ba(NO3)2
(3) 1 N Al2(SO4)3
(4) 1 N Th(NO3)4
If 'A' contains 2% NaCl and is separated by a semi permeable membrane from 'B', which contains 10% NaCl, which event will occur ?
(1) NaCl will flow from 'A' to 'B'
(2) NaCl will flow from 'B' to 'A'
(3) Water will flow from 'A' to 'B'
(4) Water will flow from 'B' to 'A'
यदि 'A' में 2% NaCl है और 'B' से एक अर्ध पारगम्य झिल्ली द्वारा पृथक किया जाता है, जिसमें 10% NaCl होता है, तो कौन सी घटना घटित होगी?
(1) NaCl 'A' से 'B' में जाएगा
(2) NaCl 'B' से 'A' में जाएगा
(3) जल 'A' से 'B' में जाएगा
(4) जल 'B' से 'A' में जाएगा
6g urea is dissolved in 1kg solvent. Value of (T1-T2) will be : (Kf=2 kg K mol-1)
(1) 0.2°C
(2)-0.2°C
(3) 0.1°C
(4)-0.1 K
6g यूरिया को 1kg विलायक में घोल दिया जाता है। (T1-T2) का मान होगा: (Kf=2 kg K mol-1)
*Vapour pressure- वाष्प दाब
*Solid solvent- ठोस विलायक
*solvent- विलायक
*solution- विलयन
*temperature- तापमान
(1) 0.2°C
(2)-0.2°C
(3) 0.1°C
(4)-0.1 K
If molality of the dilute solution is doubled, the value of molal depression constant (Kf) will be?
(1) doubled
(2) halved
(3) tripled
(4) unchanged
यदि तनु विलयन की मोललता दोगुनी हो जाती है, तो मोलल अवनमन स्थिरांक (Kf) का मान होगा?
(1) दोगुना
(2) आधा
(3) तीन गुना
(4) अपरिवर्तित
The molarity of H2SO4 solution that has a density of 1.84 g/cc at 35°C and contains 98% by weight is
(1) 4.18 M
(2) 8.14 M
(3) 18.4 M
(4) 18 M
H2SO4 विलयन की मोलरता ज्ञात कीजिए जिसका 35°C पर घनत्व 1.84 g/cc है और भार से 98% होता है [CPMT 1983, 2000; CBSE 1996, 2000; AIIMS 2001]
(1) 4.18 M
(2) 8.14 M
(3) 18.4 M
(4) 18 M
15 g of methyl alcohol is dissolved in 35 g of water. The weight percentage of methyl alcohol in solution is
(1) 30%
(2) 50%
(3) 70%
(4) 75%
15 g मेथिल एल्कोहल 35 g जल में घोला होता है। विलयन में मेथिल एल्कोहॉल का भार प्रतिशत है
(1) 30%
(2) 50%
(3) 70%
(4) 75%
The Van't Hoff factor for 0.1 M solution is 2.74. The degree of dissociation is [IIT 1999]
(1) 91.3%
(2) 87%
(3) 100%
(4) 74%
0.1M विलयन के लिए वांट हॉफ गुणक 2.74 है। वियोजन की मात्रा है? [IIT 1999]
(1) 91.3%
(2) 87%
(3) 100%
(4) 74%
A 500 gm toothpaste sample has 0.2 g fluoride concentration. The concentration of fluoride ions in terms of ppm level is
(1) 250 ppm
(2) 200 ppm
(3) 400 ppm
(4) 1000 ppm
500 gm टूथपेस्ट के नमूने में 0.2g फ्लोराइड सांद्रता होती है। पार्ट्स प्रति मिलियन (ppm) स्तर के संदर्भ में फ्लोराइड आयनों की सांद्रता है [AIIMS 1994]
(1) 250 ppm
(2) 200 ppm
(3) 400 ppm
(4) 1000 ppm
Osmotic pressure is 0.0821 atm at a temperature of 300 K. find concentration in mole/litre [Roorkee 1990]
(1) 0.033
(2) 0.066
(3) 0.33 × 10–2
(4) 3
300 K के तापमान पर परासरण दाब 0.0821 atm है। mole/litre में सांद्रता ज्ञात कीजिए हैं? [Roorkee 1990]
(1) 0.033
(2) 0.066
(3) 0.33 × 10–2
(4) 3
The vapour pressure of a solvent decreases by 10 mm of mercury when a non-volatile solute was added to the solvent. The mole fraction of the solute in the solution is 0.2. What should be if the decrease in vapour pressure is to be 20 mm of mercury then the mole fraction of the solvent is [CBSE PMT 1998]
(1) 0.8
(2) 0.6
(3) 0.4
(4) None
विलायक का वाष्प दाब 10 mm Hg से कम हो जाता है जब एक अवाष्पशील विलेय को विलायक में मिलाया गया। विलयन में विलेय का मोल अंश 0.2 है। यदि वाष्प दाब में 20 mm Hg की कमी हो जाए तो विलायक का मोल अंश क्या होना चाहिए [CBSE PMT 1998]
(1) 0.8
(2) 0.6
(3) 0.4
(4) कोई नहीं