A uniform electric field and a uniform magnetic field are acting in the same direction in a certain region. If an electron is projected in the region such that its velocity is pointed along the direction of fields, then the electron :

1. speed will decrease

2. speed will increase 

3. will turn towards the left of the direction of motion 

4. will turn towards right of direction a motion

A galvanometer of resistance, G is shunted by a resistance S ohm. To keep the main current in the circuit unchanged, the resistance to be put in series with the galvanometer is

(1) $\frac{S^{\mathit{2}}}{(S+G)}$                                             

(2) $\frac{SG}{(S+G)}$

(3) $\frac{G^{\mathit{2}}}{(S+G)}$                                             

(4) $\frac{G}{(S+G)}$

A square loop, carrying a steady current I, is placed in a horizontal plane near a long straight conductor carrying a steady current $I_{\mathit{1}}$ at a distance d from the conductor as shown in figure. The loop will experience 

(1) a net repulsive force away from the conductor 

(2) a net torque acting upward perpendicular to the horizontal plane

(3) a net torque acting downward normal to the horizontal plane

(4) a net attractive force towards the conductor 

Charge q is uniformly spread on a thin ring of radius R. The ring rotates about its axis with a uniform frequency f Hz. The magnitude of magnetic induction at the center of the ring is :

(1) $\frac{{\mathrm{\mu }}_0\mathrm{q} f}{2\mathrm{R}}$                                       

(2) $\frac{{\mathrm{\mu }}_0\mathrm{q}}{2f\mathrm{R}}$

(3) $\frac{{\mathrm{\mu }}_0\mathrm{q}}{2\mathrm{\pi }f\mathrm{R}}$                                       

(4) $\frac{{\mathrm{\mu }}_0\mathrm{q} f}{2\mathrm{\pi R}}$

A beam of cathode rays is subjected to crossed Electric (E) and magnetic fields(B). The fields are adjusted such that the beam is not deflected. The specific charge of the cathode rays is given by:

1. $\frac{B^2}{2V{E}^2}$                                             

2. $\frac{2V{B}^2}{E^2}$

3. $\frac{2V{E}^2}{B^2}$                                           

4. $\frac{E^2}{2V{B}^2}$

(where V is the potential difference between cathode and anode)

A galvanometer has a coil of resistance $100\Omega$ and gives a full scale deflection for 30 mA current.If it is to work as a voltmeter of 30V range, the resistance required to be added will be 

(1) 900 $\Omega$                                     

(2) 1800 $\Omega$

(3) 500 $\Omega$                                     

(4) 1000 $\Omega$

A square current carrying loop is suspended in a uniform magnetic field acting in the plane of the loop. If the force on one arm of the loop is $\overrightarrow{F}$, the net force on the remaining three arms of the loop is

1. 3$\overrightarrow{F}$                 

2. $-$$\overrightarrow{F}$

3. $-$3$\overrightarrow{F}$               

4.  $\overrightarrow{F}$

A closely wound solenoid of 2000 turns and area of cross-section $1.5\times {10}^{-4} {\mathrm{m}}^2$ carries a current of $2.0 \mathrm{A}.$ It is suspended through its centre and perpendicular to its length, allowing it to turn in a horizontal plane in a uniform magnetic field $5\times {10}^{-2} \mathrm{T}$ making an angle of $30°$ with the axis of the solenoid. The torque on the solenoid will be

1. $3\times {10}^{-3} \mathrm{N}‐\mathrm{m}$                                 

2. $1.5\times {10}^{-3} \mathrm{N}‐\mathrm{m}$

3. $1.5\times {10}^{-2} \mathrm{N}‐\mathrm{m}$                               

4. $3\times {10}^{-2} \mathrm{N}‐\mathrm{m}$

A particle having a mass of ${10}^{-2} \mathrm{kg}$carries a charge of $5\times {10}^{-8} \mathrm{C}.$ The particle is given an initial horizontal velocity of ${10}^5 {\mathrm{ms}}^{-1}$ in the presence of electric field $\overrightarrow{\mathbf{E}}$ and magnetic field $\overrightarrow{\mathbf{B}}$. To keep the particle moving in a horizontal direction, it is necessary that

(1) $\overrightarrow{\mathbf{B}}$ should be perpendicular to the direction of velocity and $\overrightarrow{\mathbf{E}}$ should be along the direction of velocity.

(2) Both $\overrightarrow{\mathbf{B}}$ and $\overrightarrow{\mathbf{E}}$ should be along the direction of velocity.

(3) Both $\overrightarrow{\mathbf{B}}$ and $\overrightarrow{\mathbf{E}}$ are mutually perpendicular and perpendicular to the direction of velocity.

(4) $\overrightarrow{\mathbf{B}}$ should be along the direction of velocity and $\overrightarrow{\mathbf{E}}$ should be perpendicular to the direction of velocity.

Which one of the following pairs of statements are possible?

1.   (1) and (3)                                       2.    (3) and (4)

3.   (2) and (3)                                       4.   (2) and (4)