Froth floatation process for the concentration of ores is a practical application of:
1. adsorption
2. absorption
3. coagulation
4. sedimentation
अयस्कों के सांद्रण के लिए फेन प्लवन प्रक्रम का एक व्यावहारिक अनुप्रयोग है:
(a) अधिशोषण
(b) अवशोषण
(c) स्कंदन
(d) अवसादन
In the purification of impure nickel by Mond's process, metal is purified by:
(1) Electrolytic reduction
(2) Vapour phase thermal decomposition
(3) Thermite reduction
(4) Carbon reduction
मॉन्ड प्रक्रम द्वारा अशुद्ध निकेल के शोधन में, धातु को किसके द्वारा शोधित किया जाता है?
(a) विद्युत्-अपघटन अपचयन
(b) वाष्प प्रावस्था ऊष्मीय अपघटन
(c) थर्माइट अपचयन
(d) कार्बन अपचयन
Leaching is commercially carried out for in the concentration of:
(1) Galena
(2) Argentite
(3) Copper pyrites
(4) tin stone
व्यावसायिक रूप से किसके सांद्रण के लिए निक्षालन किया जाता है:
(a) गैलेना (b) आर्जेन्टाइट
(c) कॉपर पाइराइट (d) टिन स्टोन
Chromium is obtained by reducing concentrated chromite ore with :
1. Red hot coke
2. Gaseous hydrogen
3. Aluminium powder
4. Carbon monoxide
क्रोमियम किसके साथ सांद्रित क्रोमाइट अयस्क को अपचयित करके प्राप्त किया जाता है?
(a) रक्त तप्त कोक
(b) गैसीय हाइड्रोजन
(c) ऐलुमिनियम चूर्ण
(d) कार्बन मोनोऑक्साइड
Match items of Column I with the items of Column II and assign the correct code.
Column l Column II
A. Cyanide process 1. Ultrapure Ge
B. Froth floatation process 2. Dressing of ZnS
C. Electrolytic reduction 3. Extraction of Al
D. Zone refining 4. Extraction of Au
5. Purification of Ni
Codes
A B C D
(a) 2 3 1 5
(b) 1 2 3 4
(c) 3 4 5 1
(d) 4 2 3 1
स्तंभ II के विषयों के साथ स्तंभ I के विषयों का मिलान कीजिए और सही संकेत निर्दिष्ट कीजिए।
स्तंभ l स्तंभ II
A. साइनाइड प्रक्रम 1. अतिशुद्ध Ge
B. फेन प्लवन प्रक्रम 2. ZnS की ड्रेसिंग
C. विद्युत् अपघटनी अपचयन 3. Al का निष्कर्षण
D. मंडल परिष्करण 4. Au का शोधन
5. Ni का शोधन
संकेत
A B C D
(a) 2 3 1 5
(b) 1 2 3 4
(c) 3 4 5 1
(d) 4 2 3 1
The chemical processes in the production of steel from haematite ore involve:
(A) Reduction (B) Oxidation
(C) Reduction followed by oxidation (C) Oxidation followed by reduction
हेमेटाइट अयस्क से इस्पात के उत्पादन में शामिल रासायनिक प्रक्रम हैं:
(a) अपचयन (b) ऑक्सीकरण
(c) अपचयन के बाद ऑक्सीकरण (d) ऑक्सीकरण के बाद अपचयन
For which of the following metals Bessemerisation process is important?
I : Fe, II : Cu, III : Al, IV : Silver :
(1) I, II
(2) II, III
(3) I, III
(4) all
निम्नलिखित में से किस धातु के लिए बेसेमरीकरण प्रक्रम महत्वपूर्ण है?
I: Fe, II: Cu, III: Al, IV: सिल्वर:
(A) I, II (B) II, III
(C) I, III (D) सभी
Poling process is used for:
(1) The removal of from Cu
(2) The removal of from Al
(3) The removal of from Fe
(4) All of these
दंड विलोडन किसके लिए उपयोग किया जाता है:
(a) Cu से के निष्कासन में (b) Al से के निष्कासन में
(c) Fe से के निष्कासन में (d) ये सभी में
The chemical composition of "slag" formed during the smelting process in the extraction of copper is :
(1)
(2) FeSiO3
(3) CuFeS
(4)
कॉपर के निष्कर्षण में प्रगलन प्रक्रम के दौरान बनने वाली "धातुमल" की रासायनिक संरचना है:
(A) (B) FeSiO3
(C) CuFeS2 (D)
Assertion : The reduction of a metal oxide is easier if the metal formed is in liquid state
at the temperature of reduction.
Reason : The value of entropy change +S of the reduction process is more on +ve side when the metal formed is in liquid state and the metal oxide being reduced is in solid state. Thus the value of becomes more on negative side.
अभिकथन: धातु ऑक्साइड का अपचयन आसान होता है यदि धातु का निर्माण तापमान पर अपचयन में द्रव अवस्था में होता है।
कारण: अपचयन प्रक्रम के एन्ट्रापी परिवर्तन +S का मान धनात्मक पक्ष ओर अधिक होता है जब धातु का निर्माण द्रव अवस्था में होता है और धातु ऑक्साइड अपचयित हो जाता है। इस प्रकार का मान ऋणात्मक पक्ष पर अधिक हो जाता है।