The current  in a coil varies with time as shown in the figure. The variation of induced emf with time would be

                                                   

                                                                 

                  (a)                                                                                         (b)

 

                                                                 

                   (c)                                                                                             (d)

कुंडली में धारा समय के साथ आरेख में दर्शाए गए अनुसार परिवर्तित होती है। समय के साथ प्रेरित विद्युत वाहक बल का परिवर्तन होगा -

              

                  (a)                                      (b)

 

             

                   (c)                                          (d)

* EMF (Electromotive Force) - विद्युत वाहक बल

From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

PQ is an infinite current carrying conductor. AB and CD are smooth conducting rods on which a conductor EF moves with constant velocity v as shown. The force needed to maintain constant speed of EF is –

                    

1. 1VRμ0Iv2π ln ba2                       

2. 1VRμ0Iv2 ln ba2

3. VRμ0IV2 ln ba2                         

4. VRμ0IV2π ln ba2

PQ एक अपरिमित धारावाही चालक है। AB और CD चिकनी चालक छड़ें हैं जिन पर एक चालक EF नियत वेग v के साथ चलता है जैसा कि दर्शाया गया है। EF की नियत चाल बनाए रखने के लिए आवश्यक बल है –

1. 1VRμ0Iv2π ln ba2   

2. 1VRμ0Iv2 ln ba2

3. VRμ0IV2 ln ba2     

4. VRμ0IV2π ln ba2

From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

A coil and a bulb are connected in series with a dc source, a soft iron core is then inserted in the coil. Then 

(1) Intensity of the bulb remains the same

(2) Intensity of the bulb decreases

(3) Intensity of the bulb increases

(4) The bulb ceases to glow

एक कुंडली और एक बल्ब एक दिष्ट धारा स्त्रोत के साथ श्रेणीक्रम में जुड़े हुए हैं, जब एक नरम लोहे की क्रोड को कुंडली में प्रवेश कराया जाता है। तब

(1) बल्ब की तीव्रता समान रहती है

(2) बल्ब की तीव्रता कम हो जाती है

(3) बल्ब की तीव्रता बढ़ जाती है

(4) बल्ब चमकना बंद हो जाता है

From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

advertisementadvertisement

The variation of induced emf (E) with time (t) in a coil if a short bar magnet is moved along its axis with a constant velocity is best represented as

(1)

(2)

(3)

(4)

यदि एक लघु दण्ड चुंबक अपने अक्ष के अनुदिश नियत वेग से गतिमान है, तब समय (t) के साथ प्रेरित विद्युत वाहक बल (E) के परिवर्तन को सबसे उचित रूप में किसमें दर्शाया गया है?

(1)

(2)

(3)

(4)

From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

A train is moving at a rate of 72 km/hr on a horizontal plane. If the earth's horizontal component of magnetic field is 0.345 A/m and the angle of dip is 30°, then the potential difference across the two ends of a compartment of length 1.7 m will be-

1.  1.7 V                             

2.  853×10-4 V

3.  85×10-4 V                 

4.  850 μ V

ट्रेन क्षैतिज तल में 72 km/hr की दर से गतिमान है। यदि पृथ्वी के चुंबकीय क्षेत्र का क्षैतिज घटक 0.345A/m है और नति कोण 30° है, तब 1.7m लंबे कोष्ठ के दो शीर्षों के मध्य विभवांतर कितना होगा?

1.  1.7 V

2.  853×10-4 V

3.  85×10-4 V

4.  850 μ V

From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

A 800 turn coil of effective area 0.05 m2 is kept perpendicular to a magnetic field 5×10-5 T. When the plane of the coil is rotated by 90° around any of its coplanar axis in 0.1 s, the emf induced in the coil will be:

1. 0.02V

2. 2 V

3. 0.2 V

4. 2×10-3 V

प्रभावी क्षेत्रफल 0.05 m2 की 800 फेरों की कुंडली को एक चुंबकीय क्षेत्र 5×10-5 T के लंबवत रखा जाता है। जब कुंडली के तल को 0.1 s में किसी समतलीय अक्ष के सापेक्ष 90° से घुमाया जाता है, तो कुंडली में प्रेरित विद्युत वाहक बल होगा:

1. 0.02V

2. 2 V

3. 0.2 V

4. 2×10-3 V

From NCERT
Please attempt this question first.
Hints

advertisementadvertisement

A conductor ABOCD moves along its bisector with a velocity of 1 m/s through a perpendicular magnetic field of 1 wb/m2, as shown in fig. If all the four sides are of 1m length each, then the induced emf between points A and D is

(1) 0

(2) 1.41 volt

(3) 0.71 volt

(4) None of the above

एक चालक ABOCD अपने समद्विभाजक के अनुदिश, 1 wb/mके लंबवत चुंबकीय क्षेत्र में 1m/s के वेग से गति करता है, जैसा कि चित्र में दर्शाया गया है। यदि सभी चार भुजाओं में प्रत्येक की लंबाई 1m हैं, तब बिन्दुओं A और D के बीच प्रेरित विद्युत वाहक बल है:

(1) 0

(2) 1.41volt

(3) 0.71volt

(4) उपरोक्त में से कोई नहीं

From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

A conducting wire is moving towards right in a magnetic field B. The direction of induced current in the wire is shown in the figure. The direction of magnetic field will be 

(1) In the plane of paper pointing towards right

(2) In the plane of paper pointing towards left

(3) Perpendicular to the plane of paper and down wards

(4) Perpendicular to the plane of paper and upwards

एक चालक तार एक चुंबकीय क्षेत्र में दाईं ओर गतिमान है। तार में प्रेरित धारा की दिशा चित्र में दर्शायी गई है। चुंबकीय क्षेत्र की दिशा होगी-

(1) कागज के तल में दाईं ओर इंगित 

(2) कागज के तल में बाईं ओर इंगित

(3) कागज के तल के लंबवत और अधोमुखी 

(4) कागज के तल के लंबवत और ऊर्ध्वमुखी 

 73%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

A square loop of side 5 cm enters a magnetic field with 1 cms-1. The front edge enters the magnetic field at t = 0 then which graph best depicts emf

(1)

(2)

(3)

(4)

5 cm भुजा वाला एक वर्गाकार लूप 1 cms-1 के साथ एक चुंबकीय क्षेत्र में प्रवेश करता है। सामने का किनारा t = 0 पर चुंबकीय क्षेत्र में प्रवेश करता है तो कौन सा ग्राफ सबसे अच्छे तरीके से विद्युत वाहक बल को दर्शाता है-

 

(1)

(2)

(3)

(4)

From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

advertisementadvertisement

The current in an L – R circuit builds up to 3/4th of its steady state value in 4 seconds. The time constant of this circuit is

1. 1In 2sec                       

2. 2In 2sec

3. 3In 2sec                       

4. 4In 2sec

L – R परिपथ में धारा 4 सेकंड में अपनी स्थायी अवस्था के मान की 3/4वीं हो जाती है। इस परिपथ का समय नियतांक ज्ञात कीजिए।

1. 1In 2sec

2. 2In 2sec

3. 3In 2sec

4. 4In 2sec

To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints