Which of the following is not a unit of energy
(1)
(2)
(3)
(4) Joule
निम्नलिखित में से कौन ऊर्जा का मात्रक नहीं है?
(1)
(2)
(3)
(4) जूल
If , where x is the distance travelled by the body in kilometres while t is the time in seconds, then the units of b are
(1)
(2)
(3)
(4)
यदि , जहाँ x पिंड द्वारा किलोमीटर में तय की गई दूरी है, जबकि t सेकेंड में समय है, तब b का मात्रक है-
(1)
(2)
(3)
(4)
The dimensional formula of relative density is
(1) ML–3
(2) LT–1
(3) MLT–2
(4) Dimensionless
आपेक्षिक घनत्व का विमीय सूत्र है-
(1) ML–3
(2) LT–1
(3) MLT–2
(4) विमाहीन
The dimensions of permittivity are
(1)
(2)
(3)
(4)
निर्वात की वैद्युतशीलता की विमा है-
(1)
(2)
(3)
(4)
If u1 and u2 are the units selected in two systems of measurement and n1 and n2 their numerical values, then
(1)
(2)
(3)
(4)
यदि u1 और u2 मापन की दो पद्धतियों में चयनित मात्रक हैं और n1 और n2 इनके संख्यात्मक मान है, तब:
(1)
(2)
(3)
(4)
The pressure on a square plate is measured by measuring the force on the plate and the length of the sides of the plate. If the maximum error in the measurement of force and length are respectively 4% and 2%, The maximum error in the measurement of pressure is
(1) 1%
(2) 2%
(3) 6%
(4) 8%
वर्गाकार प्लेट पर दाब को प्लेट पर बल और प्लेट की भुजाओं की लंबाई को मापकर मापा जाता है। यदि बल और लंबाई के मापन में अधिकतम त्रुटि क्रमशः 4% और 2% है, तो दाब के मापन में अधिकतम त्रुटि है-
(1) 1%
(2) 2%
(3) 6%
(4) 8%
Which one of the following does not have the same dimensions
(1) Work and energy
(2) Angle and strain
(3) Relative density and refractive index
(4) Planck constant and energy
निम्नलिखित में से किनकी विमाएँ समान नहीं हैं?
(1) कार्य और ऊर्जा
(2) कोण और विकृति
(3) आपेक्षिक घनत्व और अपवर्तनांक
(4) प्लांक नियतांक और ऊर्जा
In the vernier calipers, 9 main scale divisions match with 10 vernier scale division. First figure shows the zero error. Assume the edge of vernier as the '0' of vernier. The thickness of the object using the defected vernier callipers will be:
(A) 14.0 mm
(B) 1.40 mm
(C) -14.0 mm
(D) -1.40 mm
वर्नियर कैलिपर्स में, मुख्य पैमाने के 9 विभाजन, वर्नियर पैमाने के 10 विभाजन के साथ सम्पाती हैं। पहला चित्र शून्यांक त्रुटि दर्शाता है। वर्नियर के किनारे को वर्नियर के '0' रूप में मान लीजिए। त्रुटिपूर्ण वर्नियर कैलिपर्स का उपयोग करने पर वस्तु की मोटाई होगी-