If the resistance of voltmeter is 10000Ω and resistance of ammeter is 2Ω then find R when voltmeter reads 12V and ammeter reads 0.1 A :

(1) 118 Ω

(2) 120 Ω

(3) 124 Ω

(4) 114Ω

Subtopic:  Kirchoff's Voltage Law |
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

Potentiometer wire of length 1 m is connected in series with 490 Ω resistance and 2V battery. If 0.2 mV/cm is the potential gradient, then the resistance of the potentiometer wire is :

(1) 4.9 Ω

(2) 7.9 Ω

(3) 5.9 Ω

(4) 6.9 Ω

Subtopic:  Meter Bridge & Potentiometer |
 72%
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

In an electrical cable, there is a single wire of radius 9 mm of copper. Its resistance is 5 Ω. The cable is replaced by 6 different insulated copper wires, the radius of each wire is 3 mm. Now the total resistance of the cable will be :

(1) 7.5 Ω

(2) 45 Ω

(3) 90 Ω

(4) 270 Ω

Subtopic:  Combination of Resistors |
 50%
From NCERT
PMT - 1988
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

advertisementadvertisement

Two uniform wires A and B are of the same metal and have equal masses. The radius of wire A is twice that of wire B. The total resistance of A and B when connected in parallel is :

(1) 4 Ω when the resistance of wire A is 4.25 Ω

(2) 5 Ω when the resistance of wire A is 4.25 Ω

(3) 4 Ω when the resistance of wire B is 4.25 Ω

(4) 7 Ω when the resistance of wire B is 4.25 Ω

Subtopic:  Combination of Resistors |
 59%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

Twelve wires of equal length and same cross-section are connected in the form of a cube. If the resistance of each of the wires is \(R\), The effective resistance between two diagonal ends \(A\) and \(E\) will be:

    

1. \(2R\)
2\(12R\)
3. \(\frac{5}{6}R\)
4. \(8R\)

Subtopic:  Combination of Resistors |
 84%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

You are given several identical resistances each of value R = 10 Ω and each capable of carrying maximum current of 1 ampere. It is required to make a suitable combination of these resistances to produce a resistance of 5 Ω which can carry a current of 4 amperes. The minimum number of resistances of the type R that will be required for this job 

(1) 4

(2) 10

(3) 8

(4) 20

Subtopic:  Combination of Resistors |
 64%
From NCERT
PMT - 1990
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

advertisementadvertisement

The resistance of a wire is 10–6 Ω per metre. It is bend in the form of a circle of diameter 2 m. A wire of the same material is connected across its diameter. The total resistance across its diameter AB will be

(1) 43π×106Ω

(2) 23π×106Ω

(3) 0.88×106Ω

(4) 14π×106Ω

Subtopic:  Combination of Resistors |
 64%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

In the figure shown, the capacity of the condenser C is 2μF. The current in 2 Ω resistor is : 

(1) 9 A

(2) 0.9 A

(3) 19A

(4) 10.9A

Subtopic:  Combination of Resistors |
 78%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

When the key K is pressed at time t = 0, which of the following statements about the current I in the resistor AB of the given circuit is true?

(1) I = 2 mA at all t

(2) I oscillate between 1 mA and 2mA

(3) I = 1 mA at all t

(4) At t = 0 , I = 2 mA and with time it goes to 1 mA

Subtopic:  Kirchoff's Voltage Law |
 64%
PMT - 1995
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

advertisementadvertisement

A torch bulb rated as 4.5 W, 1.5 V is connected as shown in the figure. The e.m.f. of the cell needed to make the bulb glow at full intensity is :

(1) 4.5 V

(2) 1.5 V

(3) 2.67 V

(4) 13.5 V

Subtopic:  Grouping of Cells | Heating Effects of Current |
 53%
PMT - 1999
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints