In the figure shown, the total resistance between A and B is
(1) 12 Ω
(2) 4 Ω
(3) 6 Ω
(4) 8 Ω
In the given figure, when key K is opened, the reading of the ammeter A will be
(1) 50 A
(2) 2 A
(3) 0.5 A
(4)
In the given circuit, the potential of the point E is
(1) Zero
(2) –8 V
(3) –4/3 V
(4) 4/3 V
If a resistance R2 is connected in parallel with the resistance R in the circuit shown, then possible value of current through R and the possible value of R2 will be
(1)
(2)
(3)
(4)
A battery of emf \(10\) V is connected to resistance as shown in the figure below. The potential difference \(V_{A} - V_{B}\)
between the points \(A\) and \(B\) is:
1. \(-2\) V
2. \(2\) V
3. \(5\) V
4. \(\frac{20}{11}~\text{V}\)
A student has 10 resistors of resistance ‘r’. The minimum resistance made by him from given resistors is :
(1) 10 r
(2)
(3)
(4)
Two wires of same metal have the same length but their cross-sections are in the ratio 3 : 1. They are joined in series. The resistance of the thicker wire is 10 Ω. The total resistance of the combination will be
(1) 40 Ω
(2)
(3)
(4) 100 Ω
The equivalent resistance of the following infinite network of resistances is
(1) Less than 4 Ω
(2) 4 Ω
(3) More than 4 Ω but less than 12 Ω
(4) 12 Ω
In the figure given below, the current passing through 6 Ω resistor is
(1) 0.40 ampere
(2) 0.48 ampere
(3) 0.72 ampere
(4) 0.80 ampere
The equivalent resistance between points A and B of an infinite network of resistances each of 1 Ω connected as shown, is
(1) Infinite
(2) 2 Ω
(3)
(4) Zero