A particle of mass m has momentum p. it's kinetic energy will be
1. mp
2.
3.
4.
m द्रव्यमान के एक कण का संवेग p है। इसकी गतिज ऊर्जा होगी :
1. mp
2.
3.
4.
A hollow sphere of diameter 0.2 m and mass 2 kg is rolling on an inclined plane with velocity v = 0.5 m/ s. The kinetic energy of the sphere is
1. 0.1 J
2. 0.3 J
3. 0.5 J
4. 0.42 J
0.2 m व्यास और 2 kg द्रव्यमान का एक खोखला गोला एक आनत तल पर वेग v = 0.5 m/s से घूम रहा है। गोले की गतिज ऊर्जा है:
1. 0.1 J
2. 0.3 J
3. 0.5 J
4. 0.42 J
If the K.E. of a body is increased by 300%, its momentum will increase by
(1) 100%
(2) 150%
(3)
(4) 175%
यदि एक निकाय की गतिज ऊर्जा में 300% की वृद्धि की गई है, इसके संवेग में वृद्धि होगी:
(1) 100%
(2) 150%
(3)
(4) 175%
A point is at (x, y, z). What is its moment of inertia about x-axis:
1.
2.
3.
4.
एक बिंदु (x, y, z) पर है। X-अक्ष के परितः जड़त्व आघूर्ण क्या है?
1.
2.
3.
4.
One quarter sector is cut from a uniform circular disc of radius R. This sector has mass M. It is made to rotate about a line perpendicular to its plane and passing through the centre of the original disc. Its moment of inertia about the axis of rotation is [IIT-JEE (Screening) 2001]
1.
2.
3.
4.
R त्रिज्या के एकसमान वृत्ताकार डिस्क से एक चौथाई त्रिज्यखंड काटा गया है। इस त्रिज्यखंड का द्रव्यमान M है। यह अपने तल के लंबवत रेखा के परितः घूमने के लिए बनाया गया है और मूल डिस्क के केंद्र से होकर गुजरता है। घूर्णन अक्ष के परितः इसका जड़त्व आघूर्ण है [IIT-JEE (स्क्रीनिंग) 2001]
(1)
(2)
(3)
(4)
A mass M is supported by a massless string wound round a uniform cylinder of mass M and radius R. On releasing the mass from rest, it will fall with an acceleration assuming no slipping-
1.
2.
3.
4. g
M द्रव्यमान को एक द्रव्यमान रहित डोरी द्वारा M द्रव्यमान और R त्रिज्या के एकसमान बेलन के चारो ओर लपेटा जाता है द्रव्यमान को विरामावस्था से मुक्त करने पर, यह बिना फिसले निम्न त्वरण के साथ गिरेगा,
1.
2.
3.
4. g
A flywheel is in the form of a uniform circular disc of radius 1 m and mass 2 kg. The work which must be done on it to increase its frequency of rotation from 5 rev to 10 rev is approximately
1. 1.5 x J
2. 3.0 x J
3. 1.5 x J
4. 3.0 x J
1 m त्रिज्या और 2 kg द्रव्यमान का एक पहिया एकसमान वृत्ताकार डिस्क के रूप में है। 5 rev से 10 rev तक इसके घूर्णन की आवृत्ति को बढ़ाने के लिए इस पर किया जाने वाला लगभग कार्य होना चाहिए
1. 1.5 x J
2. 3.0 x J
3. 1.5 x J
4. 3.0 x J
A particle of mass m moving with horizontal speed 6 m/sec as shown in figure. If m << M then for one dimensional elastic collision, the speed of lighter particle after collision will be
(1) 2m/sec in original direction
(2) 2 m/sec opposite to the original direction
(3) 4 m/sec opposite to the original direction
(4) 4 m/sec in original direction
m द्रव्यमान का एक कण 6m/sec की क्षैतिज चाल से गति कर रहा है जैसा कि आकृति में दिखाया गया है। यदि m << M तब एकविमीय प्रत्यास्थ संघट्ट के लिए, संघट्ट के बाद हल्के कण की चाल होगी
(1) प्रारम्भिक दिशा में 2m/sec
(2) प्रारम्भिक दिशा के विपरीत 2 m/sec
(3) प्रारम्भिक दिशा के विपरीत 4 m/sec
(4) प्रारम्भिक दिशा में 4 m/sec
One solid sphere A and another hollow sphere B are of same mass and same outer radii. Their moment of inertia about their diameters are respectively IA and IB such that
1.
2.
3.
4.
एक ठोस गोला A और अन्य खोखला गोला B समान द्रव्यमान और समान बाह्य त्रिज्या के हैं। उनके व्यास के परितः उनका जड़त्व आघूर्ण क्रमशः IA और IB इस प्रकार है कि
1.
2.
3.
4.
A solid sphere is rolling on a frictionless surface, shown in figure with a translational velocity v m/s. If sphere climbs up to height h then value of v should be -
(a) (b)
(c) (d)
आरेख में दर्शाए गए अनुसार, एक ठोस गोलक घर्षणरहित सतह पर स्थानांतरीय वेग v m/s से लोटनिक गति कर रहा है। यदि गोलक h ऊंचाई तक चढ़ता है, तब v का मान कितना होना चाहिए?
(a) (b)
(c) (d)