If W1 is the work done in compressing an ideal gas from a given initial state through a certain volume isothermally and W2 is the work done in compressing the same gas from the same initial state through the same volume adiabatically, then:

(1) W1=W2

(2) W1<W2

(3) W1>W2

(4) W1=2W2

यदि एक आदर्श गैस को एक निश्चित आयतन के माध्यम से समतापीय रूप से एक दी गयी प्रारंभिक अवस्था से संपीडित करने में किया गया कार्य W1 है और समान गैस को समान प्रारंभिक अवस्था से समान मात्रा में रुद्धोष्म प्रक्रम के माध्यम से संपीडित करने में किया गया कार्य W2 है, तब:

(1) W1=W2

(2) W1<W2

(3) W1>W2

(4) W1=2W2

From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

A carnot engine having an efficiency of 110th of heat engine, is used as a refrigerator. If the work done on the system is 10 J, the amount of energy absorbed from the reservoir at lower temperature is -

1. 1 J

2. 90 J

3. 99 J

4. 100 J 

एक कार्नो इंजन को जिसकी दक्षता ऊष्मीय इंजन की 110 है, एक रेफ्रिजरेटर के रूप में प्रयोग किया जाता है। यदि निकाय पर किया गया कार्य 10J है, तो कोश से कम तापमान पर अवशोषित ऊर्जा की मात्रा है -

(1) 1 J

(2) 90 J

(3) 99 J

(4) 100 J

From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

The internal energy change in a system that has absorbed 2 kcal of heat and done 500 J of work is 

(a) 8900 J                                      (b) 6400 J

(c) 5400 J                                      (d) 7900 J

एक निकाय में आंतरिक ऊर्जा परिवर्तन, जिसने 2 किलो कैलोरी ऊष्मा को अवशोषित किया है और 500 J कार्य किया है, होगा:

(a) 8900 J (b) 6400 J

(c) 5400 J (d) 7900 J

From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

advertisementadvertisement

In thermodynamic processes which of the following statements is not true?

(a) In an adiabatic process the system is insulated from the surroundings

(b) In an isochoric process pressure remains constant

(c) In an isothermal process the temperature remains constant

(d) In an adiabatic process pVγ=constant

ऊष्मागतिकी प्रक्रमों में निम्नलिखित में से कौन सा कथन सही नहीं है?

(a) एक रुद्धोष्म प्रक्रम में निकाय को वातावरण से उष्मारोधित कर दिया जाता है 

(b) एक समआयतनिक प्रक्रम में दाब नियत रहता है

(c) एक समतापी प्रक्रम में तापमान नियत रहता है

(d) एक रुद्धोष्म प्रक्रम में pVγ=नियतांक 

 53%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

 

If Q, E and W denote respectively the heat added, change in internal energy and the work done in a closed cyclic process, then

(a) W=0                                  (b) Q=W=0

(c) E=0                                   (d) Q=0

यदि Q, E और W एक परिबद्ध चक्रीय प्रक्रम में क्रमशः प्रदत्त ऊष्मा , आंतरिक ऊर्जा में परिवर्तन और किये गए कार्य को प्रदर्शित करते हैं, तब

(a) W = 0       (b) Q = W = 0

(c) E = 0        (d) Q = 0

From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

A diatomic gas initially at 18°C is compressed adiabatically to one-eighth of its original volume. The temperature after compression will be 

(1) 10°C

(2) 887°C

(3) 668 K

(4) 144°C

प्रारंभ में 18 °C पर एक द्विपरमाणुक गैस को रुद्धोष्म रूप से इसके मूल आयतन के 18वें भाग तक संपीडित किया गया है। संपीडन के बाद गैस का तापमान होगा:

(1) 10°C

(2) 887°C

(3) 668 K

(4) 144°C

 59%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

advertisementadvertisement

Which of the following is correct in terms of increasing work done for the same initial volume and final volume ?

(1) Adiabatic < Isothermal < Isobaric

(2) Isobaric < Adiabatic < Isothermal

(3) Adiabatic < Isobaric < Isothermal

(4) None of these

समान प्रारंभिक आयतन और अंतिम आयतन के लिए किए गए कार्य के बढ़ते हुए पदों में निम्नलिखित में से कौन सही है ?

(1) रुद्धोष्म < समतापीय < समदाबीय

(2) समदाबीय < रुद्धोष्म < समतापीय 

(3) रुद्धोष्म < समदाबीय < समतापीय 

(4) इनमें से कोई नहीं

From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

Efficiency of a Carnot engine is 50% when temperature of outlet is 500 K. In order to increase efficiency up to 60% keeping temperature of intake the same what is temperature of outlet ?

(1) 200 K

(2) 400 K

(3) 600 K

(4) 800 K

एक कार्नो इंजन की दक्षता 50% है जब निकास का तापमान 500K है। स्रोत का तापमान समान रखते हुए दक्षता में 60% की वृद्धि करने के लिए निकास का तापमान है: 

(1) 200 K

(2) 400 K

(3) 600 K

(4) 800 K

From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

A mono atomic gas is supplied the heat Q very slowly keeping the pressure constant. The work done by the gas will be 

(1) 23Q

(2) 35Q

(3) 25Q

(4) 15Q

नियत दाब रखते हुए एक एकपरमाणुक गैस को धीरे-धीरे Q ऊष्मा की आपूर्ति की जाती है। तो गैस द्वारा किया गया कार्य होगा:  

(1) 23Q

(2) 35Q

(3) 25Q

(4) 15Q

From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

advertisementadvertisement

An insulator container contains 4 moles of an ideal diatomic gas at temperature T. Heat Q is supplied to this gas, due to which 2 moles of the gas are dissociated into atoms but temperature of the gas remains constant. Then

1. Q = 2RT

2. Q = RT

3. Q = 3RT

4. Q = 4RT

एक विद्युतरोधी पात्र में T तापमान पर एक आदर्श द्विपरमाणुक गैस के 4 मोल हैं। इस गैस को Q ऊष्मा की आपूर्ति की जाती है, जिसके कारण 2 मोल गैस को परमाणुओं में वियोजित कर दिया जाता है लेकिन गैस का तापमान नियत रहता है। तब :

(1) Q = 2RT

(2) Q = RT

(3) Q = 3RT

(4) Q = 4RT

From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints