Potential difference between the points P and Q in the electric circuit shown is
(1) 4.5 V
(2) 1.2 V
(3) 2.4 V
(4) 2.88 V
दर्शाए गए विद्युत परिपथ में बिंदु P और Q के बीच विभवांतर ज्ञात कीजिए।
(1) 4.5 V
(2) 1.2 V
(3) 2.4 V
(4) 2.88 V
For what value of unknown resistance X, the potential difference between B and D will be zero in the circuit shown in the figure
(1) 4 Ω
(2) 6 Ω
(3) 2 Ω
(4) 5 Ω
अज्ञात प्रतिरोध X के किस मान के लिए दर्शाए गए परिपथ आरेख में बिंदु B और D के बीच विभवांतर शून्य होगा?
(1) 4 Ω
(2) 6 Ω
(3) 2 Ω
(4) 5 Ω
An electric current is passed through a circuit containing two wires of the same material, connected in parallel. If the lengths and radii of the wires are in the ratio of 4/3 and 2/3, then the ratio of the currents passing through the wire will be
(1) 3
(2) 1/3
(3) 8/9
(4) 2
विद्युत धारा एक ऐसे परिपथ से गुजरती है, जिसमें समान पदार्थ के दो तार समांतर क्रम में जुड़े हुए हैं। यदि तारों की लंबाई और त्रिज्या 4/3 और 2/3 के अनुपात में हैं, तब तार से गुजरने वाली धाराओं का अनुपात होगा:
(1) 3
(2) 1/3
(3) 8/9
(4) 2
The equivalent resistance between points A and B in the circuit shown in the figure is
1. 6R
2. 4R
3. 2R
4. R
आरेख में दर्शाए गए परिपथ में, बिंदुओं A और B के मध्य समतुल्य प्रतिरोध कितना है?
1. 6R
2. 4R
3. 2R
4. R
By ammeter, which of the following can be measured
(1) Electric potential
(2) Potential difference
(3) Current
(4) Resistance
ऐमीटर द्वारा, निम्न में से किसको मापा जा सकता है?
(1) विद्युत विभव
(2) विभवांतर
(3) धारा
(4) प्रतिरोध
Constantan wire is used in making standard resistances because of its :
(1) Specific resistance is low
(2) Density is high
(3) Temperature coefficient of resistance is negligible
(4) Melting point is high
किस कारण से मानक प्रतिरोध बनाने में कान्सटेन्टन तार का उपयोग किया जाता है :
(1) विशिष्ट प्रतिरोध कम होता है
(2) घनत्व अधिक होता है।
(3) प्रतिरोध का ताप गुणांक नगण्य होता है।
(4) गलनांक उच्च होता है।
The electric intensity E, current density j and specific resistance k are related to each other by the relation :
(1) E = j/k
(2) E = jk
(3) E = k/j
(4) k = jE
विद्युत तीव्रता E, धारा घनत्व j और विशिष्ट प्रतिरोध k किस संबंध से एक-दूसरे से संबंधित हैं:
(1) E = j/k
(2) E = jk
(3) E = k/j
(4) k = jE
Resistances of 6 ohm each are connected in the manner shown in adjoining figure. With the current 0.5 ampere as shown in figure, the potential difference is
(1) 3.6 V
(2) 6.0 V
(3) 3.0 V
(4) 7.2 V
6 ओम के प्रतिरोधों में से प्रत्येक को संलग्न आरेेख में दर्शाए गए अनुसार जोड़ा गया हैं। 0.5 ऐम्पियर धारा के साथ, जैसा कि आरेख में दर्शाया गया है, विभवांतर कितना है?
(1) 3.6 V
(2) 6.0 V
(3) 3.0 V
(4) 7.2 V
Resistance of tungsten wire at 150°C is 133 Ω. Its resistance temperature coefficient is 0.0045/°C. The resistance of this wire at 500°C will be
(1) 180 Ω
(2) 225 Ω
(3) 258 Ω
(4) 317 Ω
150°C पर टंगस्टन तार का प्रतिरोध 133 Ω है। इसका प्रतिरोध ताप गुणांक 0.0045/°C है। 500°C पर तार का प्रतिरोध कितना होगा?
(1) 180 Ω
(2) 225 Ω
(3) 258 Ω
(4) 317 Ω
A current of 1 mA is flowing through a copper wire. How many electrons will pass a given point in one second
1.
2.
3.
4.
1 mA की धारा तांबे के तार में प्रवाहित हो रही है। दिए गए बिंदु से एक सेकंड में कितने इलेक्ट्रॉन प्रवाहित होगे?
1.
2.
3.
4.