The reading of an ideal voltmeter in the circuit shown is:

| 1. | \(0.6~\text V\) | 2. | \(0~\text V\) |
| 3. | \(0.5~\text V\) | 4. | \(0.4~\text V\) |
| 1. | \(2:1\) | 2. | \(4:9\) |
| 3. | \(9:4\) | 4. | \(1:2\) |
A ring is made of a wire having a resistance of \(R_0=12~\Omega.\). Find points \(\mathrm{A}\) and \(\mathrm{B}\), as shown in the figure, at which a current-carrying conductor should be connected so that the resistance \(R\) of the subcircuit between these points equals \(\frac{8}{3}~\Omega\)

| 1. | \(\dfrac{l_1}{l_2} = \dfrac{5}{8}\) | 2. | \(\dfrac{l_1}{l_2} = \dfrac{1}{3}\) |
| 3. | \(\dfrac{l_1}{l_2} = \dfrac{3}{8}\) | 4. | \(\dfrac{l_1}{l_2} = \dfrac{1}{2}\) |
Two cities are \(150~\text{km}\) apart. The electric power is sent from one city to another city through copper wires. The fall of potential per km is \(8~\text{volts}\) and the average resistance per \(\text{km}\) is \(0.5~\text{ohm}.\) The power loss in the wire is:
| 1. | \(19.2~\text{W}\) | 2. | \(19.2~\text{kW}\) |
| 3. | \(19.2~\text{J}\) | 4. | \(12.2~\text{kW}\) |
| 1. | current density | 2. | current |
| 3. | drift velocity | 4. | electric field |
| 1. | \(\dfrac{a^3R}{3b}\) | 2. | \(\dfrac{a^3R}{2b}\) |
| 3. | \(\dfrac{a^3R}{b}\) | 4. | \(\dfrac{a^3R}{6b}\) |
The potential difference \(V_{A}-V_{B}\) between the points \({A}\) and \({B}\) in the given figure is:

| 1. | \(-3~\text{V}\) | 2. | \(+3~\text{V}\) |
| 3. | \(+6~\text{V}\) | 4. | \(+9~\text{V}\) |
A battery consists of a variable number \(n\) of identical cells (having internal resistance \(r\) each) which are connected in series. The terminals of the battery are short-circuited and the current \(I\) is measured. Which of the graphs shows the correct relationship between \(I\) and \(n?\)
| 1. | 2. | ||
| 3. | 4. |
A charged particle having drift velocity of \(7.5\times10^{-4}~\text{ms}^{-1}\) in an electric field of \(3\times10^{-10}~\text{Vm}^{-1},\) has mobility of:
1. \(2.5\times 10^{6}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)
2. \(2.5\times 10^{-6}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)
3. \(2.25\times 10^{-15}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)
4. \(2.25\times 10^{15}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)
For the circuit given below, Kirchhoff's loop rule for the loop \(BCDEB\) is given by the equation:
| 1. | \(-{i}_2 {R}_2+{E}_2-{E}_3+{i}_3{R}_1=0\) |
| 2. | \({i}_2{R}_2+{E}_2-{E}_3-{i}_3 {R}_1=0\) |
| 3. | \({i}_2 {R}_2+{E}_2+{E}_3+{i}_3 {R}_1=0\) |
| 4. | \(-{i}_2 {R}_2+{E}_2+{E}_3+{i}_3{R}_1=0\) |