(a) | conservation of the current density vector. |
(b) | conservation of charge. |
(c) | the fact that the momentum with which a charged particle approaches a junction is unchanged (as a vector) as the charged particle leaves the junction. |
(d) | the fact that there is no accumulation of charges at a junction. |
Which of the above statements are correct?
1. | (b) and (c) |
2. | (a) and (c) |
3. | (b) and (d) |
4. | (c) and (d) |
For the circuit shown in the figure, the current \(I\) will be:
1. | \(0.75~\text{A}\) | 2. | \(1~\text{A}\) |
3. | \(1.5~\text{A}\) | 4. | \(0.5~\text{A}\) |
Two solid conductors are made up of the same material and have the same length and the same resistance. One of them has a circular cross-section of area and the other one has a square cross-section of area . The ratio is:
1. | \(1.5\) | 2. | \(1\) |
3. | \(0.8\) | 4. | \(2\) |
For the circuit given below, Kirchhoff's loop rule for the loop \(BCDEB\) is given by the equation:
1. | \(-{i}_2 {R}_2+{E}_2-{E}_3+{i}_3{R}_1=0\) |
2. | \({i}_2{R}_2+{E}_2-{E}_3-{i}_3 {R}_1=0\) |
3. | \({i}_2 {R}_2+{E}_2+{E}_3+{i}_3 {R}_1=0\) |
4. | \(-{i}_2 {R}_2+{E}_2+{E}_3+{i}_3{R}_1=0\) |
The equivalent resistance between \(A\) and \(B\) for the mesh shown in the figure is:
1. | \(7.2\) \(\Omega\) | 2. | \(16\) \(\Omega\) |
3. | \(30\) \(\Omega\) | 4. | \(4.8\) \(\Omega\) |
A constant voltage is applied between the two ends of a uniform metallic wire. Some heat is developed in it. The heat developed doubles if:
1. | both the length and the radius of the wire are halved. |
2. | both the length and the radius of the wire are doubled. |
3. | the radius of the wire is doubled. |
4. | The length of the wire is doubled. |
A cell having an emf \(\varepsilon\) and internal resistance \(r\) is connected across a variable external resistance \(R\). As the resistance \(R\) is increased, the plot of potential difference \(V\) across \(R\) is given by:
1. | 2. | ||
3. | 4. |
In the circuit shown in the figure below, if the potential at point \(A\) is taken to be zero, the potential at point \(B\) will be:
1. \(+1\) V
2. \(-1\) V
3. \(+2\) V
4. \(-2\) V
Twelve wires of equal resistance \(R\) are connected to form a cube. The effective resistance between two diagonal ends \(A\) and \(E\) will be:
1. | \(\dfrac{5 R}{6}\) | 2. | \(\dfrac{6 R}{5}\) |
3. | \(12 R\) | 4. | \(3 R\) |
The net resistance of the circuit between \(A\) and \(B\) is:
1. | \(\frac{8}{3}~\Omega\) | 2. | \(\frac{14}{3}~\Omega\) |
3. | \(\frac{16}{3}~\Omega\) | 4. | \(\frac{22}{3}~\Omega\) |