The temperature at which the Celsius and Fahrenheit thermometers agree (to give the same numerical value) is:
1. | −40∘−40∘ | 2. | 40∘40∘ |
3. | 0∘0∘ | 4. | 50∘50∘ |
On a new scale of temperature, which is linear and called the WW scale, the freezing and boiling points of water are 39∘ W39∘ W and 239∘ W239∘ W respectively. What will be the temperature on the new scale corresponding to a temperature of 39∘ C39∘ C on the Celsius scale?
1. 78∘ W78∘ W
2. 117∘ W117∘ W
3. 200∘ W200∘ W
4. 139∘ W139∘ W
1. | −415.44∘ F,−69.88∘ F |
2. | −248.58∘ F,−56.60∘ F |
3. | 315.44∘ F,−69.88∘ F |
4. | 415.44∘ F,−79.88∘ F |
The ice-point reading on a thermometer scale is found to be 20∘, while the steam point is found to be 70∘. When this thermometer reads 100∘, the actual temperature is:
1. 80∘C
2. 130∘C
3. 160∘C
4. 200∘C
1. | L(1+γθ) | 2. | L(1+γ2θ) |
3. | L(1+γ3θ) | 4. | L(1+2γ3θ) |
The coefficient of linear expansion of brass and steel rods are α1 and α2. Lengths of brass and steel rods are L1 and L2 respectively. If (L2−L1) remains the same at all temperatures, which one of the following relations holds good?
1. α1L22=α2L21
2. α21L2=α22L1
3. α1L1=α2L2
4. α1L2=α2L1
The coefficient of area expansion β of a rectangular sheet of a solid in terms of the coefficient of linear expansion α is:
1. 2α
2. α
3. 3α
4. α2
A rod A has a coefficient of thermal expansion (αA) which is twice of that of rod B (αB). The two rods have length lA, lB where lA=2lB. If the two rods were joined end-to-end, the average coefficient of thermal expansion is:
1. | αA | 2. | 2αA6 |
3. | 4αA6 | 4. | 5αA6 |
A brass wire 1.8 m long at 27∘C is held taut with a little tension between two rigid supports. If the wire is cooled to a temperature of −39∘C, what is the tension created in the wire?
( Assume diameter of the wire to be 2.0 mm , coefficient of linear expansion of brass =2.0×10−5 K−1, Young's modulus of brass=0.91×1011 Pa )
1. 3.8×103 N
2. 3.8×102 N
3. 2.9×10−2 N
4. 2.9×102 N