If the units of force and length, each is increased by four times, then the unit of energy increases by:
1. | 16 times | 2. | 8 times |
3. | 2 times | 4. | 4 times |
The velocity \(v\) of a particle at time \(t\) is given by \({v}={at}+\frac{{b}}{{t}+{c}}\). The dimensions of \({a}\), \({b}\), and \({c}\) are respectively:
1. \( {\left[{LT}^{-2}\right],[{L}],[{T}]} \)
2. \( {\left[{L}^2\right],[{T}] \text { and }\left[{LT}^2\right]} \)
3. \( {\left[{LT}^2\right],[{LT}] \text { and }[{L}]} \)
4. \( {[{L}],[{LT}], \text { and }\left[{T}^2\right]}\)
If \(97.52\) is divided by \(2.54\), the correct result in terms of significant figures is:
1. | \( 38.4 \) | 2. | \(38.3937 \) |
3. | \( 38.394 \) | 4. | \(38.39\) |
A physical quantity \(A\) is related to four observable quantities \(a\), \(b\), \(c\) and \(d\) as follows, \(A= \frac{a^2b^3}{c\sqrt{d}},\) the percentage errors of measurement in \(a\), \(b\), \(c\) and \(d\) are \(1\%\), \(3\%\), \(2\%\) and \(2\%\) respectively. The percentage error in quantity \(A\) will be:
1. \(12\%\)
2. \(7\%\)
3. \(5\%\)
4. \(14\%\)
The number of significant figures in the numbers \(25.12,\) \(2009,\) \(4.156\) and \(1.217\times 10^{-4}\) is:
1. \(1\)
2. \(2\)
3. \(3\)
4. \(4\)
A physical quantity P is given by P = . The quantity which contributes the maximum percentage error in P is:
1. A
2. B
3. C
4. D
The length of a cylinder is measured with a meter rod having the least count of 0.1 cm. Its diameter is measured with vernier callipers having the least count of 0.01 cm. Given that the length is 5.0 cm and the radius is 2.0 cm. The percentage error in the calculated value of the volume will be
1. 1%
2. 2%
3. 3%
4. 4%
The periods of oscillation of a simple pendulum in an experiment are recorded as 2.63 s, 2.56 s, 2.42 s, 2.71 s, and 2.80 s respectively. The average absolute error will be:
1. 0.1 s
2. 0.11 s
3. 0.01 s
4. 1.0 s
The decimal equivalent of \(\frac{1}{20} \) up to three significant figures is:
1. | \(0.0500\) | 2. | \(0.05000\) |
3. | \(0.0050\) | 4. | \(5.0 \times 10^{-2}\) |
The percentage errors in the measurement of mass and speed are \(2\%\) and \(3\%\) respectively. How much will be the maximum error in the estimation of the kinetic energy obtained by measuring mass and speed:
1. \(11\%\)
2. \(8\%\)
3. \(5\%\)
4. \(1\%\)