1. | \(9.98\) m | 2. | \(9.980\) m |
3. | \(9.9\) m | 4. | \(9.9801\) m |
A screw gauge has the least count of \(0.01~\text{mm}\) and there are \(50\) divisions in its circular scale. The pitch of the screw gauge is:
1. | \(0.25\) mm | 2. | \(0.5\) mm |
3. | \(1.0\) mm | 4. | \(0.01\) mm |
If \({x}=\frac{{a} \sin \theta+{b} \cos \theta}{{a}+{b}},\) then:
1. | the dimensions of \(x\) and \(a\) must be the same |
2. | the dimensions of \(a\) and \(b\) are not the same |
3. | \(x\) is dimensionless |
4. | none of the above |
A thin wire has a length of \(21.7~\text{cm}\) and a radius of \(0.46~\text{mm}\). The volume of the wire to correct significant figures is:
1. | \( 0.15~ \text{cm}^3 \) | 2. | \( 0.1443~ \text{cm}^3 \) |
3. | \( 0.14~ \text{cm}^3 \) | 4. | \( 0.144 ~\text{cm}^3\) |
Which of the following measurements is the most precise?
1. 5.00 mm
2. 5.00 cm
3. 5.00 m
4. 5.00 km
In which of the following, the number of significant figures is different from that in the others?
1. | \(2.303~\text{kg}\) | 2. | \(12.23~\text{m}\) |
3. | \(0.002\times10^{5}~\text{m}\) | 4. | \(2.001\times10^{-3}~\text{kg}\) |
Which of the following relations is dimensionally wrong? [The symbols have their usual meanings]
1. \(s= ut+\frac{1}{6}at^2\)
2. \(v^2= u^2+\frac{2as^2}{\pi}\)
3. \(v= u-2at\)
4. All of these
When units of mass, length, and time are taken as \(10~\text{kg}, 60~\text{m}~\text{and}~60~\text{s}\) respectively, the new unit of energy becomes \(x\) times the initial SI unit of energy. The value of \(x\) will be:
1. \(10\)
2. \(20\)
3. \(60\)
4. \(120\)
The mass and volume of a body are \(4.237~\text{grams}\) and \(2.5~\text{cm}^3\), respectively. The density of the material of the body in correct significant figures will be:
1. \(1.6048~\text{grams cm}^{-3}\)
2. \(1.69~\text{grams cm}^{-3}\)
3. \(1.7~\text{grams cm}^{-3}\)
4. \(1.695~\text{grams cm}^{-3}\)
The numbers \(2.745\) and \(2.735\) on rounding off to \(3\) significant figures will give respectively,
1. | \(2.75\) and \(2.74\) | 2. | \(2.74\) and \(2.73\) |
3. | \(2.75\) and \(2.73\) | 4. | \(2.74\) and \(2.74\) |