\(D_1,D_2\) are ideal diodes and the output \((V_{AB})\) of the transformer is \(10\) V (RMS). The current through the resistor is:

1. zero
2. \(20\) mA
3. \(40\) mA
4. \(20\sqrt2\) mA

Subtopic:  Applications of PN junction |
Level 3: 35%-60%
Hints

If an AND-gate and an OR-gate are OR-ed together, the resulting gate is:
1. AND
2. OR
3. XOR
4. none of the above
Subtopic:  Logic gates |
Level 3: 35%-60%
Hints

The input to a Zener diode circuit is an AC-voltage along with a DC:    \(V_i=(20~\text V)\sin\omega t+(20~\text V)~\)
Current flows through the diode:
                      
1. continuously, in both directions
2. continuously, only in one direction
3. intermittently, in both directions
4. intermittently, only in one direction
Subtopic:  Applications of PN junction |
Level 3: 35%-60%
Hints

advertisementadvertisement

The voltage across \(AB\) i.e., \(V_{AB}\) is varied from \(0\) V to \(12\) V. The current through branch \(XY~(i)\) is measured. Then:
                  
1. \(i=0.05\) A if \(V_{AB}\geq10\) V and \(i=\dfrac{V_{AB}}{200~\Omega}\) otherwise
2. \(i=0.05\) A if \(V_{AB}\leq10\) V and \(i=\dfrac{V_{AB}}{200~\Omega}\) otherwise
3. \(i=0.05\) A
4. \(i=\dfrac{V_{AB}}{200~\Omega}\)
Subtopic:  Applications of PN junction |
Level 3: 35%-60%
Hints

In the circuit shown in the figure, \(V_A>V_B.\) Which of the diodes conduct?
            
1. only \(D_3\) 2. \(D_1\) and \(D_3\)
3. all of the diodes 4. none of the diodes
Subtopic:  PN junction |
 53%
Level 3: 35%-60%
Hints

premium feature crown icon
Unlock IMPORTANT QUESTION
This question was bookmarked by 5 NEET 2025 toppers during their NEETprep journey. Get Target Batch to see this question.
✨ Perfect for quick revision & accuracy boost
Buy Target Batch
Access all premium questions instantly
Which circuit element would make the best series filter to prevent high–frequency signals from passing through a bass speaker?
1. a capacitor
2. an inductor
3. a resistor
4. a transformer
Subtopic:  Rectifier |
Level 3: 35%-60%
Hints

advertisementadvertisement

Hole current in a semiconductor is due to the:
1. movement of valence electrons
2. movement of conduction electrons
3. movement of positrons
4. movement of positive ions
Subtopic:  Types of Semiconductors |
 51%
Level 3: 35%-60%
Please attempt this question first.
Hints
Please attempt this question first.

premium feature crown icon
Unlock IMPORTANT QUESTION
This question was bookmarked by 5 NEET 2025 toppers during their NEETprep journey. Get Target Batch to see this question.
✨ Perfect for quick revision & accuracy boost
Buy Target Batch
Access all premium questions instantly
The circuit shown in figure is given an input signal \(V_i,\) which varies with time and the corresponding output is \(V_o.\) Then,
1. \(V_o=V_i+E\)
2. \(V_o=V_i-E\)
3. \(V_o=V_i,\) only when \(V_i>E\)
4. \(V_o=V_i,\) only when \(V_i<E\)
Subtopic:  PN junction |
Level 3: 35%-60%
Hints

The voltage \(V_{AB}=20~\text{V}\) at its peak value, and is sinusoidal in time. The current \(i\) (in amperes), when plotted as a function of time, is given by:
(consider the diodes as ideal.)
    
1. 2.
3. 4.
 
Subtopic:  PN junction |
Level 3: 35%-60%
Hints

advertisementadvertisement

Assuming that the diodes \(D_1\) and \(D_2\)​ in the electric circuit are ideal, the value of the current flowing through the \(1~\Omega\) resistance is:
           
1. \(\dfrac{2}{3}~\text{A}\) 2. \(2~\text{A}\)
3. \(1~\text{A}\) 4. \(\dfrac{1}{2}~\text{A}\)
Subtopic:  PN junction |
 60%
Level 2: 60%+
Please attempt this question first.
Hints
Please attempt this question first.