To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
For the figures given below, the correct observation is:
1. | pressure at the bottom of the tank (a) is greater than at the bottom of the tank (b). |
2. | pressure at the bottom of the tank (a) is lesser than at the bottom of (b). |
3. | pressure depends upon the shape of the container. |
4. | pressure at the bottom of (a) and (b) are the same. |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
A liquid is poured into three vessels of the same base area and equal heights as shown in the figure, then:
1. | The maximum force on the base will be for the vessel \(C.\) |
2. | The maximum force on the base will be for the vessel \(B.\) |
3. | The maximum force on the base will be for the vessel \(A.\) |
4. | Force on the base will be equal for all the vessels. |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
If pressure at half the depth of a lake is equal to 2/3rd the pressure at the bottom of the lake, then the depth of the lake is:
1. | 10 m | 2. | 20 m |
3. | 60 m | 4. | 30 m |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
A diver is \(10\) m below the surface of the water. The approximate pressure experienced by the diver is:
1. \(10^5\) Pa
2. \(2\times10^5\) Pa
3. \(3\times10^5\) Pa
4. \(4\times 10^5\) Pa
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
The area of cross-section of the wider tube shown in the figure is \(800~\text{cm}^2.\) If a mass of \(12~\text{kg}\) is placed on the massless piston, then the difference in heights \(h\) of the levels of water in the two tubes will be:
1. | \(10~\text{cm}\) | 2. | \(6~\text{cm}\) |
3. | \(15~\text{cm}\) | 4. | \(2~\text{cm}\) |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
The value of g at a place decreases by 2%. Then, the barometric height of mercury:
1. | increases by 2%. | 2. | decreases by 2%. |
3. | remains unchanged. | 4. | sometimes increases and sometimes decreases. |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
The height of a mercury barometer is \(75 ~\text{cm}\) at sea level and \(50 ~\text{cm}\) at the top of a hill. The ratio of the density of mercury to that of air is \(10^4.\) The height of the hill is:
1. | \(250 ~\text m\) | 2. | \(2.5 ~\text {km}\) |
3. | \(1.25 ~\text {km}\) | 4. | \(750 ~\text m\) |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
A siphon in use is demonstrated in the following figure. The density of the liquid flowing in the siphon is 1.5 gm/cc. The pressure difference between the point P and S will be:
1. | 105 N / m | 2. | 2 × 105 N / m |
3. | Zero | 4. | Infinity |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
A vertical \(\mathrm{U}\)-tube of uniform inner cross-section contains mercury in both its arms. A glycerin (density\(=1.3\) g/cm3) column of length \(10\) cm is introduced into one of its arms. Oil of density \(0.8\) g/cm3 is poured into the other arm until the upper surfaces of the oil and glycerin are at the same horizontal level. The length of the oil column is:
(density of mercury \(=13.6\) g/cm3)
1. \(10.4\) cm
2. \(8.2\) cm
3. \(7.2\) cm
4. \(9.6\) cm
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.