Q. No.The variation of EMF with time for four types of generators is shown in the figures. Which amongst them can be called AC voltage?
 |
 |
| (a) | (b) |
 |
 |
| (c) | (d) |
| 1. | (a) and (d) |
| 2. | (a), (b), (c), and (d) |
| 3. | (a) and (b) |
| 4. | only (a) |
An AC ammeter is used to measure the current in a circuit. When a given direct current passes through the circuit, the AC ammeter reads \(6\) A. When another alternating current passes through the circuit, the AC ammeter reads \(8\) A. Then the reading of this ammeter if DC and AC flow through the circuit simultaneously is:
1. \(10 \sqrt{2}\) A
2. \(14\) A
3. \(10\) A
4. \(15\) A
In the diagram, two sinusoidal voltages of the same frequency are shown. What is the frequency and the phase relationship between the voltages?
| Frequency in Hz | Phase lead of \(N\) over \(M\) in radians | |
| 1. | \(0.4\) | \(-\pi/4\) |
| 2. | \(2.5\) | \(-\pi/2\) |
| 3. | \(2.5\) | \(+\pi/2\) |
| 4. | \(2.5\) | \(-\pi/4\) |
| 1. | AC cannot pass through DC Ammeter. |
| 2. | AC changes direction. |
| 3. | Average value of current for the complete cycle is zero. |
| 4. | DC Ammeter will get damaged. |
A direct current of \(5~ A\) is superimposed on an alternating current \(I=10sin ~\omega t\) flowing through a wire. The effective value of the resulting current will be:
| 1. | \(15/2~A\) | 2. | \(5 \sqrt{3}~A\) |
| 3. | \(5 \sqrt{5}~A\) | 4. | \(15~A\) |
| 1. | about \(14~\text{A}\) | 2. | about \(28~\text{A}\) |
| 3. | about \(20~\text{A}\) | 4. | cannot say |
| 1. | \(60\) Hz and \(240\) V |
| 2. | \(19\) Hz and \(120\) V |
| 3. | \(19\) Hz and \(170\) V |
| 4. | \(754\) Hz and \(70\) V |
1. \( \frac{1}{\sqrt{2}}\left(i_1+i_2\right) \)
2. \( \frac{1}{\sqrt{2}}\left(i_i+i_2\right)^2 \)
3. \( \frac{1}{\sqrt{2}}\left(i_1^2+i_2^2\right)^{1 / 2} \)
4. \( \frac{1}{2}\left(i_1^2+i_2^2\right)^{1 / 2}\)
The peak value of an alternating emf \(E = E_{0}\sin\omega t\) is \(10\) volts and its frequency is \(50\) Hz. At a time \(t=\frac{1}{600}~\text{s},\) the instantaneous value of the emf will be:
| 1. | \(1\) volt | 2. | \(5 \sqrt{3}\) volts |
| 3. | \(5\) volts | 4. | \(10\) volts |
The variation of the instantaneous current \((I)\) and the instantaneous emf \((E)\) in a circuit are shown in the figure. Which of the following statements is correct?
| 1. | The voltage lags behind the current by \(\frac{\pi}{2}\). |
| 2. | The voltage leads the current by \(\frac{\pi}{2}\). |
| 3. | The voltage and the current are in phase. |
| 4. | The voltage leads the current by \(\pi\). |
© 2024 GoodEd Technologies Pvt. Ltd.