The correct statement is:

1. The intermediate image in a compound microscope is real, erect and magnified
2. Intermediate image in a compound microscope is real, inverted, but diminished
3. Intermediate image in a compound microscope is virtual, erect and magnified
4. Intermediate image in a compound microscope is real, inverted and magnified

Subtopic:  Simple & Compound Microscope |
 71%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A ray of light is incident on an equilateral glass prism placed on a horizontal table as shown. For minimum deviation, a true statement is:


 

1. PQ is horizontal
2. QR is horizontal
3. RS is horizontal
4. Either PQ or RS is horizontal 

Subtopic:  Prisms |
 78%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

When a ray of light falls on a given plate at an angle of incidence \(60^{\circ}\), the reflected and refracted rays are found to be normal to each other. The refractive index of the material of the plate is:

1. \(\frac{\sqrt{3}}{2} \) 2. \(1.5 \)
3. \(1.732 \) 4. \( 2\)
Subtopic:  Refraction at Plane Surface |
 76%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

advertisementadvertisement

A thin rod of length \(\frac{f}{3}\) lies along the axis of a concave mirror of focal length \(f\). One end of its magnified, real image touches an end of the rod. The length of the image is:

1. \(f\)

2. \(\frac{f}{2}\)

3. \(2f\)

4. \(\frac{f}{4}\)

Subtopic:  Reflection at Spherical Surface |
 57%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A thin equiconvex lens of power P is cut into three parts A, B, and C as shown in the figure. If P1, P2, and P3 are powers of the three parts respectively, then:

 

1. \(P_1=P_2=P_3\) 2. \(P_1>P_2=P_3\)
3. \(P_1<P_2=P_3\) 4. \(P_2=P_3=2P_1\)
Subtopic:  Lenses |
 69%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A point source of light B is placed at a distance L in front of the centre of a mirror of width d hung vertically on a wall. A man walks in front of the mirror along a line parallel to the mirror at a distance 2L from it as shown. The greatest distance over which he can see the image of the light source in the mirror is:
                       
1. d/2                                     

2. d

3. 2d                                       

4. 3d

Subtopic:  Reflection at Plane Surface |
 58%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

advertisementadvertisement

The focal length of the objective lens and the eye lens is 4 mm and 25 mm respectively in a compound microscope. The distance between objective and eyepiece lens is 16 cm. Find its magnifying power for relaxed eye position:

1. 32.75   
2. 327.5 
3. 0.3275 
4. None of the above

Subtopic:  Simple & Compound Microscope |
 60%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A medium shows relation between i and r as shown. If the speed of light in the medium is nc then the value of n is:

                  

1. 1.5

2. 2

3. 2–1

4. 3–1/2

Subtopic:  Refraction at Plane Surface |
 76%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

In an astronomical telescope in normal adjustment a straight black line of length \(L\) is drawn on inside part of the objective lens. The eye-piece forms a real image of this line. The length of this image is \(l\). The magnification of the telescope is:
1. \(\frac{L}{l+1}\)
2. \(\frac{L}{l-1}\)
3. \(\frac{L+1}{L-1}\)
4. \(\frac{L}{l}\)

Subtopic:  Telescope |
 60%
From NCERT
NEET - 2015
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

advertisementadvertisement

For the angle of minimum deviation of a prism to be equal to its refracting angle, the prism must be made of a material whose refractive index:

1. lies between\(\sqrt{2} \text { and } 1 \text {. }\)
2. lies between 2 and \(\sqrt{2} \)
3. is less than 1.
4. is greater than 2.


 

Subtopic:  Prisms |
 64%
From NCERT
NEET - 2012
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch