A body, under the action of a force \(\overset{\rightarrow}{F} = 6 \hat{i} - 8 \hat{j} + 10 \hat{k}\), acquires an acceleration of 1 ms^-2. The mass of this body must be:

1. 2 √10 kg

2. 10 kg

3. 20 kg

4. 10 √2 kg

A block \(B\) is pushed momentarily along a horizontal surface with an initial velocity \(v.\) If \(\mu\) is the coefficient of sliding friction between \(B\) and the surface, the block \(B\) will come to rest after a time: 
 
1. \(v \over g \mu\)
2. \(g \mu \over v\)
3. \(g \over v\)
4. \(v \over g\)

A 0.5 kg ball moving with a speed of 12 m/s strikes a hard wall at an angle of ${\mathrm{30°}}^{\mathrm{}}$ with the wall. It is reflected with the same speed and at the same angle. If the ball is in contact with the wall for 0.25 s, the average force acting on the wall is:
              

1. 48 N

2. 24 N

3. 12 N

4. 96 N

A block of mass \(10~\text{kg}\) is in contact with the inner wall of a hollow cylindrical drum of radius \(1~\text{m}.\) The coefficient of friction between the block and the inner wall of the cylinder is \(0.1.\) The minimum angular velocity needed for the cylinder, which is vertical and rotating about its axis, will be: 
\(\left(g= 10~\text{m/s}^2\right )\)
1. \(10~\pi~\text{rad/s}\)
2. \(\sqrt{10}~\pi~\text{rad/s}\)
3. \(\frac{10}{2\pi}~\text{rad/s}\)
4. \(10~\text{rad/s}\)

A particle moving with velocity \(\vec{v}\) is acted by three forces shown by the vector triangle \(\mathrm{PQR}.\) The velocity of the particle will:

A mass m₁, placed on top of a trolley of mass m₃, is connected to another mass m₂ by means of string passing over a smooth pulley as shown in figure. The friction between surfaces is negligible. For m₁ ans m₂ not to move with respect to trolley, the horizontal force F to be applied on trolley is

1. F=m₃g

2. F=(m₁ + m₂)g

3. $\mathrm{F}=\left({\mathrm{m}}_1+{\mathrm{m}}_2+{\mathrm{m}}_3\right)\frac{{\mathrm{m}}_2\mathrm{g}}{{\mathrm{m}}_1}$

4. F= m₁g

A pendulum of mass m hangs from a support fixed to a trolley. The direction of the string when the trolley rolls up a plane of inclination $\alpha$ with acceleration $a_0$ is 

1. $\theta ={\tan }^{-1} \alpha$

2. $\theta ={\tan }^{-1} \left(\frac{a_0}{g}\right)$

3. $\theta ={\tan }^{-1} \left(\frac{g}{a_0}\right)$

4. $\theta ={\tan }^{-1} \left(\frac{a_0+g \sin \alpha }{g \cos \alpha }\right)$