Which method of purification is represented by the following equation?
Ti(s) + 2I2(g)TiI4(g)
TiI4(g)Ti(s) + 2I2(g)
1. Cupellation
2. Poling
3. Van Arkel
4. Zone refining
शोधन की कौन सी विधि निम्नलिखित समीकरण द्वारा दर्शाई गई है?
Ti(s) + 2I2(g) TiI4(g) Ti(s) + 2I2(g)
(a) खर्परण
(b) दंड विलोडन
(c) वॉन आरकैल
(d) मंडल परिष्करण
Incorrect match is :
(a) Purification of Al :Baeyer's method
(b) polling :Reduction of
(C) (chromite ore) : NaOH/N
(d) Ag: Mac Arthur cyanideprocess
गलत सुमेलित है:
(a) Al का शोधन: बेयर विधि
(b) दंड विलोडन: का अपचयन
(c) (क्रोमाइट अयस्क): NaOH/N
(d) Ag: मैक आर्थर साइनाइडप्रक्रम
Which of the following is leached with NaCN?
1. Ore of Al
2. Ore of Cu
3. Ore of Ag
4. Ore of Zn
निम्नलिखित में से किसे NaCN के साथ निक्षालित किया गया है?
1. Al का अयस्क
2. Cu का अयस्क
3. Ag का अयस्क
4. Zn का अयस्क
The following equation represents a method of purification of nickel by,
Ni + 2CO Ni(CO)4 Ni +4CO this method is:
impure pure
1. cupellation
2. Mond's process
3. Van Arkel method
4. Zone refining
निम्नलिखित समीकरण निकेल की शुद्धि के एक प्रक्रम का प्रतिनिधित्व करता है,
Ni + 2CONi(CO)4 Ni +4CO यह विधि है:
अशुद्ध शुद्ध
(1) खर्परण
(b) मॉन्ड प्रक्रम
(c) वॉन आरकैल प्रक्रम
(d) मंडल परिष्करण
In the extraction of copper from its sulphide ore, the metal is finally obtained by the
reduction of cuprous oxide with
1. copper (1) sulphide (Cu2S)
2. sulphur dioxide (SO2)
3. iron sulphide (FeS)
4. carbon monoxide (CO)
इसके सल्फाइड अयस्क से कॉपर के निष्कर्षण में, धातु को अंत में क्यूप्रस ऑक्साइड को किसके साथ अपचयन द्वारा प्राप्त किया जाता है
(a) कॉपर (1) सल्फाइड (Cu2S)
(b) सल्फर डाइऑक्साइड (SO2)
(c) आयरन सल्फाइड (FeS)
(d) कार्बन मोनोऑक्साइड (CO)
Cupellation process is used in the metallurgy of:
1. copper
2. silver
3. lead
4. iron
किसकी धातुकर्मिकी में खर्परण प्रक्रम का उपयोग किया जाता है?
(a) कॉपर
(b) सिल्वर
(c) लेड
(d) आयरन
Correct match is:
(1) Bayer's method
(2) Matte
(3) van Arkel method
(4) Thomas slag Raw material for cement industry
सही सुमेलित है:
(a) बेयर विधि
(b) मैट
(c) वॉन आरकैल विधि
(d) थॉमस धातुमल सीमेंट उद्योग के लिए कच्चा माल
Assertion : In the Hoop’s process of aluminium purification, the fused materials remain in three different layers. These layers remain intact even in electrolytic reduction.
Reason : This is an oxidation reaction and leads to the formation of a soluble complex.
अभिकथन: ऐलुमिनियम शोधन के हूप प्रक्रम में, संगलित पदार्थ तीन अलग-अलग परतों में रहते हैं। विद्युतअपघटनी अपचयन में भी ये परतें बरकरार हैं।
कारण: यह एक ऑक्सीकरण अभिक्रिया है और एक घुलनशील संकुल का निर्माण होता है।
In Serpek's process , by product obtained in the purification of bauxite is:
1. Al2O3
2. N2
3. NH3
4. none
सर्पेक प्रक्रम में, बॉक्साइट के शोधन में प्राप्त सहउत्पाद होता है:
(a) Al2O3
(b) N2
(c) NH3
(d) कोई नहीं
Assertion : Silica is added as a flux in reverberatory furnace, in the extraction of copper from copper pyrites.
Reason : Silica decreases the melting point of the ore and remove the impurity of lead sulphide as
अभिकथन: कॉपर पाइराइट से कॉपर के निष्कर्षण में सिलिका को परावर्तनी भट्ठी में एक गालक के रूप में मिलाया जाता है।
कारण: सिलिका अयस्क के गलनांक को कम करता है और के रूप लेड सल्फाइड की अशुद्धि दूर हो जाती है।