The following configuration of the logic gate is equivalent to

1.  NAND gate

2.  XOR gate

3.  OR gate

4.  NOR gate

Three ideal diodes are connected to the battery as shown in the circuit. The current supplied by the battery is:

                         
1. zero
2. \(4~\text{A}\)
3. \(2~\text{A}\)
4. \(6~\text{A}\)

In a common emitter transistor amplifier, the audio signal voltage across resistance of 1 k$\Omega$ is 2V. If the base resistance is 200$\Omega$ and the current amplification factor is 50, the input signal voltage will be

1. 4 mV

2. 8 mV

3. 16 mV

4. 32 mV

If a small amount of aluminium is added to the silicon crystal:

A transistor is operated in common emitter configuration at ${\mathrm{V}}_{\mathrm{c}} = 10\mathrm{V}.$ When base current is changed from 10mA to 30mA, it produces a change in emitter current from 2A to 4A, the current amplification factor is

1.  100

2.  99

3.  10

4.  9

When a transistor is used as a switch it is in:

1.  Active state

2.  Cut off state

3.  Saturation state

4.  Both cut off state and saturation state are possible

Which of the following is correct for \(\mathrm{n}\)-type semiconductors?

$\mathrm{If} \mathrm{\alpha } \mathrm{be} \mathrm{the} \mathrm{current} \mathrm{gain} \mathrm{of} \mathrm{a} \mathrm{transistor} \mathrm{in} \mathrm{common} \mathrm{base} \mathrm{mode} \mathrm{and} \mathrm{\beta } \mathrm{be} \mathrm{the} \mathrm{current} \mathrm{gain} \mathrm{in}$
$\mathrm{common} \mathrm{emitter} \mathrm{mode} \mathrm{then}-$

1.  $\mathrm{\alpha } < 1$

2.  $\mathrm{\beta } > 1$

3.  $\mathrm{\alpha } = \frac{\mathrm{\beta }}{1 + \mathrm{\beta }}$

4.  All of these